Skip to main content

Dynamic configuration

An application should make appropriate calls for NanoSec IKE configuration and customization. The following calls should typically be placed after the call made to IKE_init during NanoSec IKE Integration:

  • IKE_ikeSettings To customize the application’s IKE callbacks and dynamically adjust IKE configuration.

  • IKE_initServer To register an IKE pre-shared key and/or a host key-certificate pair. If both a pre-shared key and host key-certificate pair are provided, the certificate has a higher priority during negotiation than the pre-shared key.

Note

Dynamic configuration is not necessary for NanoSec IPsec.

In this section: